TerraBloom 4" Inline Duct Fan, ECMF-100-R, Remote Speed Controlled, 160 CFM, 18W
- [BUNDLE] THIS LISTING IS FOR 4" EC DUCT FAN (SKU: ECMF-100) WITH REMOTE SPEED CONTROLLER ADD-ON MODULE. THIS BUNDLE REPLACES MODEL ECMF-100-R.
- REMOTE SPEED ADJUSTMENT: Using wireless remote speed controller ECMF-R series fans' speed can be adjusted from 15%-100% without creating any additional hum or background noise. Remote allows to select among 6 pre-set speeds from up to 50 FT range
- STORES LAST SPEED SETTING: This unit will store your last selected speed setting in its memory. It will come back at the stored speed when the power is shut down and turned back on via a switch or a timer.
- ENERGY SAVINGS: Built with cutting edge brushless electronically commutated Motor (EC) motor and dual jet type impeller, our new 4" ECMF-R- series fans deliver 160 Cubic Feet per Minute (CFM) of Airflow using only 18 Watts
- ALUMINUM HOUSING: Resists accidental damage, harsh elements and reduces maintenance in demanding applications such as ventilation of grow tents, gardens, farms, crawl spaces, attics, etc
- COMPACT: Only 6.25" (L) x 7.25" (W) x 5.9" (H). Ideal for applications with minimal space available. Installation hardware (screws and anchors) included in set
- ETL LISTED WITH 2 YR WARRANTY: ECMF-R series fans are ETL listed and Conform to UL standard 507, Certified to CSA Standard C22.2 No 113. Covered by 2 year warranty
How loud is this 4" EC fan?
The sound output of our fans depends on the speed selected. Please
refer to the video below showing the sound output of ECMF-100-R fan at
speed levels from 1 to 6. The measurements of dB output are shown on the
screen in front of the unit and the microphone recording the sound is
installed 5ft away from the fan.
How to adjust ECMF series fan speed?
Each ECMF fan is supplied with a variable speed controller (potentiometer type). Speed controller connects to the fan via the supplied speed controller wire with 3.5mm TRRS male-to-male jacks (also known as T(ip)-R(ing)-R(ing)-S(leeve) jack). When connected, supplied speed controller allows users to select any speed between 0-100% of output according to the preferred use/noise level. If the speed controller is disconnected, ECMF fan will automatically work at 100% output.
Can an external speed controller be used to adjust ECMF series fan speed?
All ECMF series fans manufactured on 11/1/2019 or later support external speed controllers with PWM or 0-10 VDC signal types. Please verify that your speed controller or Building Management System is capable of controlling the equipment with PWM or 0-10 VDC signals.
Can I adjust the speed of this fan with a Raspberry PI or Arduino based controller device?
Yes, Raspberry PI and Arduino devices can be used to control the speed of our ECMF fans via PWM signal.
Will Rheostat Speed Controllers or Dimmer Switches work with ECMF fan?
Speed controllers designed for AC motors, such as rheostat speed controllers or dimmer switches, will not work with ECMF series fans. If you need a replacement of ECMF fan speed controllers please contact TerraBloom.
What are the requirements for the fan's operating environment?
ECMF fan can be operated in the environments with temperatures between 15°F(-10°C) to 140°F (60°C) and humidity levels not exceeding 90%. ECMF series fans have IPX4 IP Rating.
What type of ball bearing used in ECMF series fans?
ECMF fans are built with heavy-duty dual ball bearings rated for up to 70,000 hours of operation.
Can ECMF fans be used for boosting airflow in heater ducts?
ECMF can be installed in heating ducts with most modern home furnaces, however, it is important to ensure that the air temperature in the duct is not over 140°F for prolonged periods of time. Please note, fire places and fire-based heaters supply air at over 140°F, which will cause ECMF fan to trigger overheat safety switch and/or cause deformation of the impeller.
Are ECMF fans UL/ETL listed for use in commercial operations? Do they conform with commercial business insurance requirements?
TerraBlooms ECMF series fans are ETL listed and Conform to UL standards 507, Certified to CSA Standard C22.2 No 113 for United States and Canada. ECMF series fans can be used in commercial environments, where business insurance mandates operation of UL/ETL certified appliances only.